Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
XB7EW34M2PMain Range of product Harmony XB7 Product or component type Illuminated push button Device short name XB7 Mounting diameter 22 mm Sale per indivisible quantity 10 IP degree of protection IP20 (rear face) conforming to IEC 60529 IP54 (front face) conforming to IEC 60529 Shape of signaling unit head Round Type of operator Spring return Operator profile Red flush, unmarked Contacts type and composition 1 NC Connections terminals Screw clamp terminals, <=
Main
| Range of product | Harmony XB7 |
| Product or component type | Illuminated push-button |
| Device short name | XB7 |
| Mounting diameter | 22 mm |
| Sale per indivisible quantity | 10 |
| IP degree of protection | IP20 (rear face) conforming to IEC 60529 IP54 (front face) conforming to IEC 60529 |
| Shape of signaling unit head | Round |
| Type of operator | Spring return |
| Operator profile | Red flush, unmarked |
| Contacts type and composition | 1 NC |
| Connections - terminals | Screw clamp terminals, <= 2 x 1.5 mm² with cable end conforming to EN/IEC 60947-1 Screw clamp terminals, 1 x 0.34...2 x 2.5 mm² without cable end conforming to EN/IEC 60947-1 |
| Light source | LED |
| Bulb base | Integral LED |
| [Us] rated supply voltage | 230 V AC at 50/60 Hz |
| Device presentation | Monolithic product |
Complementary
| CAD overall width | 29 mm |
| CAD overall height | 29 mm |
| CAD overall depth | 57 mm |
| Terminals description ISO n°1 | (11-12)NC |
| Net weight | 0.022 kg |
| Device mounting | Fixing hole - diameter: 22.5 mm 22.3 +0.4/0 conforming to EN/IEC 60947-1 |
| Fixing center | >= 30 x 40 mm (support panel) metal - thickness: 1…6 mm >= 30 x 40 mm (support panel) plastic - thickness: 2…6 mm |
| Fixing mode | Fixing nut beneath head: 2…2.4 N.m |
| Contact operation | Slow-break |
| Positive opening | With conforming to EN/IEC 60947-5-1 appendix K |
| Mechanical durability | 300000 cycles |
| Tightening torque | 0.8…1.2 N.m conforming to EN 60947-1 |
| Shape of screw head | Cross compatible with JIS No 1 screwdriver Cross compatible with Philips no 1 screwdriver Cross compatible with pozidriv No 1 screwdriver Slotted compatible with flat √ò 4 mm screwdriver Slotted compatible with flat √ò 5.5 mm screwdriver |
| Short-circuit protection | 4 A cartridge fuse type gG conforming to EN/IEC 60947-5-1 |
| [Ui] rated insulation voltage | 250 V (pollution degree 3) conforming to EN/IEC 60947-1 |
| [Uimp] rated impulse withstand voltage | 4 kV EN/IEC 60947-1 |
| [Ie] rated operational current | 0.1 A at 250 V, DC-13, R300 conforming to EN/IEC 60947-5-1 0.22 A at 125 V, DC-13, R300 conforming to EN/IEC 60947-5-1 0.3 A at 240 V, AC-14, D300 conforming to EN/IEC 60947-5-1 0.6 A at 120 V, AC-14, D300 conforming to EN/IEC 60947-5-1 |
| Electrical durability | 1000000 cycles, DC-13, 0.3 A at 24 V, operating rate <216000 cyc/mn, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C 1000000 cycles, AC-15, 0.03 A at 230 V, operating rate <216000 cyc/mn, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C 1000000 cycles, AC-15, 0.09 A at 240 V, operating rate <108000 cyc/mn, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C |
| Electrical reliability | Λ <= 10exp(-6) at 17 V and 5 mA conforming to EN/IEC 60947-5-4 |
| Signalling type | Steady |
| Supply voltage limits | 195…264 V AC |
| Current consumption | 16...20 mA |
| Service life | 80000 h at rated voltage and 25 °C |
Environment
| Protective treatment | TH |
| Ambient air temperature for storage | -40…70 °C |
| Ambient air temperature for operation | -25…70 °C |
| Electrical shock protection class | Class II conforming to IEC 61140 |
| NEMA degree of protection | NEMA 12 |
| Standards | UL 508 JIS C8201-5-1 CSA C22.2 No 14 EN/IEC 60947-5-1 EN/IEC 60947-1 JIS C8201-1 |
| Vibration resistance | 5 gn (f= 2…500 Hz) conforming to IEC 60068-2-6 |
| Shock resistance | 50 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27 |
| Electromagnetic emission | Class B conforming to EN 55011 |
Offer Sustainability
| Sustainable offer status | Green Premium product |
| REACh Regulation | REACh Declaration |
| REACh free of SVHC | Yes |
| EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration |
| Toxic heavy metal free | Yes |
| Mercury free | Yes |
| RoHS exemption information | Yes |
| China RoHS Regulation | China RoHS declaration |
| Environmental Disclosure | Product Environmental Profile |
| Circularity Profile | End of Life Information |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 319 reviews
Sort
Product Reviews
★★★★★ 5
Everything you need for your robot maintenance
Color: Saros 10r-20/Qrevo Curvx Accessories, Color: Saros 10r-20/Qrevo Curvx Accessories
Automatic floor robots are a great convenience and, at this point, I can't picture our house without one. Being able to turn them on at night and wake up to vacuum and mopped floors is pretty amazing. The problem is that you eventually have to do maintenance on them to keep them running. I guess it's not that much to ask of you since they do go for a long time with only water refills and waste water dumps. It's hard to find kits that are comprehensive enough to cover all the needs, so when I saw this one, I had to pick it up.
The kit contains multiples of every consumable on the Roborock (ours is named Mrs. Nesbit). It also comes with a screwdriver and a blade/brush to clean dirt and hair. The small spinning brush is easy to replace, and the only one you need the screwdriver for. The mopping pad functional on the Roborock is one of my favorite features, so having multiple replacements makes this kit very attractive. They simple peel off of the Velcro and lay back the same. The split rollers take a minute to figure out, but you don't need to loosen the screws - they pull right off the U shaped plastic pieces they are attached to, but keep track of which goes with which color because each plastic piece only goes back on its correct side. The easiest to replace is the filter on the dust bin in the robot since it just pops out and the new one fits in. The lasts step is to replace the dust bag in the base itself, which is very simple.
Overall, the quality and fit of all the pieces included in this kit were great. I didn't run across anything that was off or I had to force on. While my pads and brushes weren't as bad as my other vacuum (named The Beast), the vacuum had been warning me that their life was coming to an end and I needed to swap them out. Now I have multiple replacements for the future and my Roborock is good to go for many months. I will be picking this kit up again when I run out and wouldn't hesitate to recommend it at this price point.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026
★★★★★ 4
Good Budget Replacement Set, but Mop Pads Differ from Original
Color: Saros 10r-20/Qrevo Curvx Accessories
These replacement accessories fit my Roborock Qrevo S5 without any issues. I run my robot daily because I have a dog, so I go through mop pads pretty quickly and have already used this set for a couple of cleaning runs around the house on vinyl floors. The bags seal properly, and I did not notice any loss of suction or performance with the filters compared to the original parts.
The biggest difference was the mop pads themselves. They feel noticeably different from the OEM Roborock ones and seem a bit lower in quality. Even so, they still got the job done for normal daily cleaning and handled pet hair and dirt well. Since the original pads also wear out for me after multiple washes, this set still feels like a practical and more affordable alternative overall.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
★★★★★ 3
Not as good as the oem accessories
Color: Saros 10r-20/Qrevo Curvx Accessories, Color: Saros 10r-20/Qrevo Curvx Accessories
I have a roborock saros 10r and all of these accessories seem to be compatible and work with my robovac however the quality of them isn’t nearly the same level. The mop pads material are much coarser and less fine than the original. The side brushed bristles weren’t nearly as tightly bound together. The roller brush isn’t as well made. The cleaning performance I think is similar but i suspect they will not last as long as the oem accessories which are just much better made. Over it’s a mix on value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
★★★★★ 5
All the parts needed to maintain your Roborock robot, with a great fit and finish.
Color: Saros 10r-20/Qrevo Curvx Accessories, Color: Saros 10r-20/Qrevo Curvx Accessories
This is a great consumable parts replacement package for many Roborock robots. I utilized it for my Saros 10R. The parts all fit great and honestly look and feel just like the OEM parts that came with the robot. Over time, I have purchased new consumable parts for my Saros 10R from various sources, but I think that I will be using this kit in the future.
The kit comes with everything one needs to maintain Roborock robots, as outlined in its description. The main brushes are of good quality and fit well. I have found that the main brushes and the filter fit are the hardest things for third-party vendors to duplicate, and these do that well. What I like most is the mop heads. They are of very good quality and may be better than the OEM mop heads.
Everything in this kit fits well and mimics the manufacturer's parts closely in both quality and fit. Compared to the cost of Roborock OEM parts, this is a home run.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 4
Nice Value Replacement Kit for the Qrevo CurvX, Brushes Slightly Less Dense Than OEM
Color: Saros 10r-20/Qrevo Curvx Accessories, Color: Saros 10r-20/Qrevo Curvx Accessories
All of the included items fit my Roborock Qrevo CurvX nicely, and the material quality is fairly close to the OEM parts. I also liked the quantity of each item included, since it should be quite a while before I need to buy another replacement kit.
The only downside I noticed was that the main roller brushes have about 1/4 fewer bristles than the OEM versions, so they don't seem quite as dense. Other than that, everything fits as expected and the kit seems like a solid value for maintaining the CurvX.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026
recommand products
Milwaukee High Capacity 36 in. W x 22.1 in. D 12-Drawer Tool Chest and Cabinet Combo
53.00
KNIPEX 6.1-in Electrical Pliers
41.24
KD Tools GearWrench diagonal pliers 7.5-in Insulated Pliers with Wire Cutter
20.06
KNIPEX 9.95-in Electrical Crimping Pliers, 97 52 13
199.99
Husky 1/2 in. Drive Deep 1-1/16 in. Socket (12-Point)
10.47