Synergy 8811-01 Steering Correction Kit

Correct the suspension geometry on your 2018-2023 Jeep Wrangler JL or 2020-2023 Jeep Gladiator JT with the Synergy 8811-01 Steering Correction Kit from GAP. The Synergy Jeep JL/JLU/JT Steering Correction Kit is the ultimate fix for a lifted JL or JT. When lifting beyond 2" it becomes critical to correct several important areas of the vehicle's suspension geometry. Increased drag link and track bar angles contribute to bump steer and wander. The Synergy Steering Correction kit allows the drag link to be flipped to the top-side of the steering knuckle, and the track bar mount at the axle side to be raised 3.25". Combining both of these proven components, Synergy can simultaneously re-center the axle under the vehicle and raise the roll center height to improve the stability of your lifted Jeep. When they flatten out the angles of the drag link and track bar at ride height, they minimize axle shift during suspension travel. Adding this kit to your 3" or greater lift will dramatically improve your vehicles handling and capabilities. This kit features 100 percent bolt-on components to ensure an easy, trouble free installation with the use of basic hand tools.

Features:

• No Cutting Or Drilling Required
• 8855-11 Bracket Raises Front Track Bar 3.125" From Stock Location
• 8800-01 Drag Link Is CNC Formed From 1.5” X .250 Wall DOM Tubing
• Raises Axle Side Sway Bar Mounting Holes To Improve Geometry For Lifted Jeeps
• Laser Cut And CNC Formed From 3/16” An 1/4” Steel For Precision Fit And Maximum Durability
• Both Ends Of The Bar Use Pinch Bolts Instead Of Jam Nuts To Simplify Installation And Adjustment
• Securely Indexes To The Factory Track Bar Bracket And Reinforces With Additional Attachment Points
• Synergy Double Adjuster Sleeve Allows Adjustment Of Drag Link Length Without Removing It From The Vehicle
  
• Suspension Components Feature An Abrasion-Resistant Powder Coat Finish For Maximum Durability And Corrosion Resistance
  
• Synergy HD Metal On Metal Tie Rod Ends With A Single Plane Version At The Pitman Arm Side To Completely Eliminate Drag Link Flop

Notes:

Must run drag link in high steer configuration, flipped above knuckle, to use this bracket.
8875-01 adjustable front track bar recommended for lifts 3" or higher.
Minimum of 3" bump stop spacing required.
Maximum 4.75" wheel backspacing required to clear drag link in flipped position.

Applications:

2018-2023 Jeep Wrangler JL / JLU
2020-2023 Jeep JT Gladiator